How to install the router and connect it to SumUp wifi network?

In order to install the router, you simply need to follow these steps:

1. Unbox your router and plug it to the electricity.

2. You will notice that you have an Ethernet cable in the box; this one goes from your router (from the coloured port) to your router (your box, Movistar, Orange, Free ...).

3. Then, you will need to plug the printers to the SumUp router. In order to do that, you will need RJ45 cables that will go from the printer to the router.

4. Finally, once everything is plugged, you need to access to > iPad settings > Wifi > Find your SumUp network and connect it. 

5. In order to connect your iPad to the SumUp network, look for the sticker below your SumUp router and enter the password written there.

Remember! It is important that you make sure that your devices are ALWAYS connected to your SumUp network and no one else in order to make sure that your printers will never stop working.