EPSON OT-BZ20 : External buzzer
The external Buzzer for EPSON Printers is an accessory that provides a sound signal each time a ticket is printed. This device is made for noisy environments such as a bar or a kitchen.
To configure it, please follow the steps below :
Turn OFF the printer
Connect the External Buzzer to the printer’s RJ12 port (same as for the cash-drawer)
Turn the printer ON while holding down the FEED button until a ticket is printed.
Again, press the FEED button until a ticket names MODE SELECTION is printed.
Enter the 3rd menu named CUSTOMIZE VALUE SETTINGS by making 3 short presses on the FEED button then a long one. A new ticket is printed.
Enter the 13th menu named BUZZER CONTROL by making 13 short presses on the FEED button then a long one. A new ticket is printed.
Select the 1st Mode OPTION BUZZER by making 1 short press on the FEED button then a long one. A new ticket is printed. NB : on this Menu you can also configure the settings of your Buzzer.
Select the 1st option ENABLE by making 1 short press on the FEED button then a long one. A final ticket is printed indicating the operation is COMPLETED.
Your Buzzer is now configured, you can turn the printer OFF then ON again.
To fix the Buzzer to you printer, please follow the instruction provided in the User’s Manual